Silex technology Printer C 6100U User Manual

Users Manual CX  
I. Introduction  
Thank you for purchasing PRICOM print server.  
This manual provides complete information on how to setup and use PRICOM C-700/C-  
5100/C-6100U/C-6200U safely. Please read this manual carefully before using the  
product. This manual is edited commonly for the three products and there are some  
parts not applied for your PRICOM.  
PRICOM print servers provide network connectivity for your printers.  
PRICOM is compatible with status monitor of Canon printer driver. You can check the  
printer status that is connected to the network at real time on the screen of your computer.  
<PRICOM C-700/C-5100/C-6100U/C-6200U>„  
Supported Protocol: TCP/IP and IPX Peer to Peer*  
Supported OS: Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP.  
*IPX Peer to Peer is an original protocol developed by silex technology, Inc.  
-PRICOM C-700  
10BASE-T compatible print server, which can be connected directly to parallel interface  
port.  
-PRICOM C-5100  
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected  
directly to parallel interface port.  
-PRICOM C-6100U  
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected  
to USB interface port.  
-PRICOM C-6200U  
10BASE-T/100BASE-TX compatible auto-detection print server, which can be connected  
to USB interface port.  
Introduction  
1-1  
 
Users Manual CX  
Safety Instructions  
To ensure safe and proper use, please read the following information carefully before  
starting to use our product. The safety instructions include important information on  
the safe handling of the product and on general safety issues for the user.  
IMPORTANT SAFEGUARDS  
Make sure to read all safety instructions carefully and to fully understand them before  
starting to use PRICOM.  
This manual contains safety instructions that must be observed to avoid potential hazards  
that could result in personal injuries or material damage. The safety instructions have  
been classified according to the potential risk involved as follows:  
Danger:  
"Danger" indicates the existence of a hazard that could result in death or serious bodily injury if the safety  
instruction is not observed.  
Warning:  
"Warning" indicates the existence of a hazard that could result in bodily injury if the safety instruction is  
not observed.  
Caution:  
"Caution" indicates the existence of a hazard that could result in material damage if the safety instruction  
is not observed.  
Notice:  
"Notice" contains general information that relates to the safe operation of the product.  
1. PRICOM  
Warning:  
To avoid the risk of electric shock or possible damage, never remove the cover of PRICOM and never  
disassemble PRICOM. Contact the dealer of silex technology, Inc. products for assistance if repair or  
adjustment is necessary.  
Introduction  
1-3  
 
Users Manual CX  
2. AC ADAPTER  
Danger:  
Never attempt to disassemble or repair an AC Adapter, as exposure to electric shock hazards may result.  
Always contact the dealer of silex technology, Inc. product if repair or replacement is required.  
Warning:  
Always use the AC Adapter provided with PRICOM, to avoid any risk of fire or material damage. Using an  
unauthorized and incompatible AC Adapter could result in bodily injury or material damage.  
Caution:  
Never bend or twist the power cord and never pull on the power cord in an attempt to remove the plug from  
the socket. Never place heavy objects on the power cord, as this could damage the cord. Always grasp the  
plug when you unplug the power cord. Unplugging the power cord by pulling on the cord itself could  
damage the cord.  
3. NETWORK CABLES  
Danger:  
Never use damaged or worn network cables. The use of damaged or worn network cables could result in  
electric shock, burns or fire.  
4. PROPER TREATMENT OF THE DEVICE  
Warning:  
To avoid any risk of short-circuit, fire or other internal damage, never allow any metal objects such as  
screws or paper clips to fall into the device. If that should happen, immediately turn off the power and  
unplug the power cord. Contact the dealer of silex technology, Inc. product for appropriate assistance. To  
avoid damage to PRICOM, never allow any liquids to spill into any part of PRICOM, and never expose  
PRICOM to rain or water. If any of these events should occur, turn off PRICOM immediately.  
Contact the dealer of silex technology, Inc. product for assistance before attempting to use PRICOM again.  
To prevent computer malfunction or equipment damage, never place PRICOM on top of (or adjacent to) a  
heating device, and never expose it to direct sunlight. Never store PRICOM in a locked and unventilated  
vehicle, where excessive internal temperatures may be encountered. Always unplug the power cord during  
lightning storms in order to protect the device from possible damage as a result of a power surge. If  
PRICOM is ever dropped and damaged, or if you ever detect the emission of an extraordinary odor or  
excessive heat, unplug the power cord and turn off the printer and PRICOM immediately. Contact the  
dealer of silex technology, Inc. product for appropriate assistance.  
Introduction  
1-4  
 
Users Manual CX  
Notice:  
If PRICOM has been exposed to cold temperature, allow it to warm to room temperature before turning it  
on. This will prevent the occurrence of harmful condensation within the device (this is a particularly  
important concern when the device is being used in cold climates). Avoid using PRICOM in dusty areas  
since dust particles can affect the reliability of PRICOM. Contact the dealer of silex technology, Inc. product  
if your device has become contaminated with dust or dirt particles.  
Introduction  
1-5  
 
Users Manual CX  
Emission Notice  
PRICOM C-700/C-6100U  
This equipment has been tested and found to comply with the limits for a Class A digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instruction manual,  
may cause harmful interference to radio communications. Operation of this equipment  
in a residential area is likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
EN55022 Class-A  
EN55024  
Introduction  
1-6  
 
Users Manual CX  
PRICOM C-5100/C-6200U  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following  
measures:  
-Reorient or relocate the receiving antenna.  
-Increase the separation between the equipment and receiver.  
-Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
-Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
EN55022 Class-B  
EN55024  
Introduction  
1-7  
 

Sennheiser Microphone BF 521 II User Manual
Sharp All in One Printer AL 2050 User Manual
Sharp Car Video System PN K322B User Manual
SIIG TV Mount CEMT0A12S1 User Manual
Sony MP3 Player Accessories AC DN2B User Manual
Sony Speaker SS MB150H User Manual
Sony Speaker System XR EM70 User Manual
Star Manufacturing Toaster QCS3 1400BH User Manual
Symbol Technologies Two Way Radio PDT811 User Manual
Tamron Camera Lens AF001C700 User Manual